Smart Capdion Purifier

Eaquasys water purifier

Eaquasys purifier

Eaquasys CapDion water purifier

Eaquasys CapDion System

Precious Water Technology

Precious water Eaqusys

Eaquasys Water Purifier C8

Eaquasys CapDion C8

Eaquasys CapDion C-8 water purifier

Eaquasys CapDion C-8 water purifier

Smart CapDion Bipolar CDI System Vs Reverse Osmosis (RO) FiltrationWhether the quality of the output water of RO is suitable for a drink?

Smart CapDion System

Smart CapDion a new technology

The Smart CapDion is an intelligent system, which keeps all the useful minerals needed by the body in the effluent.
The output water of the device is very pleasant and tasty and can be drunk directly.
The amount of water output is 95% of the input water and therefore its efficiency is 95%.
The cost of maintaining the device is very low.

The Smart CapDion system can be used as a full flow purifier for incoming water with a TDS of less than 3000 ppm. Or used as a downstream and supplementary system after RO for TDS concentrations above 3000 to make the effluent drinkable and reduce RO sewage from 30% to 5%.

The Smart CapDion as the compact model of developed Capacitive Deionization (CDI) technology is the modern choice for all of your needs to healthy and tasty water.

Reverse Osmosis (RO)

Reverse Osmosis (RO) an old technology

RO water:

RO Water IS NOT SUITABLE FOR DRINKING: Consumption of that as the drinking water can cause the decalcification of the bones of the body and osteoporosis.

RO WATER IS BITTER AND ACIDIC: In addition, the water coming out of it is very bitter and acidic and is harmful to health.
The RO  requires constant replacement of membranes, which imposes a high cost.
RO, WASTE 25-30% OF VALUABLE WATER: Most important issue is that RO causes a loss of 25-30% of the water entering the device as sewage.

RO is just could play a role as an up-stream water desalination to reduce the concentration of resolved minerals for entering to a down-stream purifier like Smart CapDion to produce the drinking water.

New Smart Capdion SDI SystemAn Innovative Solution

Applicable to a wide range of TDS

 

  • High Salt Removal Rate
  • High Recovery Rate
  • Low energy consumption due to low voltage operation
SMART CAPDION FULL SYSTEM C4
smart capdion 1 final low
S-CAPDION SYSTEM PROCESS1

The principle of deionization technology is when electricity is applied to the electrode, ions of opposite charge pass through the ion exchange membrane and move to the surface of the electrode and are electrically adsorbed.

electrolysis full process

 

 

 

  • Dimension: 230(mm,Ø)X 312(mm,L)
  • Housing: Cylindrical / ABS
  • Electrode: Bipolar-Carbon/ion
  • Flow: Side to side
  • Allowable Pressure: 6bar, max.
  • Power source: 300VDC X 1A

Up to four cells can be configured in series,

applicable to a wide range of TDS

  • Operation under stable DC voltage by using bipolar

electrode (300VDC or less)

  • High recovery rate, up to 95%
  • Salt removal rate up to 95%
  • Operating temperature, max. 60℃
  • Low energy consumption due to low voltage operation
  • The electrode is not exposed to ensure electrical safety
  • Compared with other processes, the pretreatment
  • conditions are simple and the pretreatment process
  • cost is economical.

Pre-treatment Conditions

ParameterUnitCriteria
pH2-10
TurbidityNTU<5
Pre-filterum<10
TOCppm<15
Oilppm<0.5
OilChlorineppm<1

smart capdion cell x2

Capdion Production Line

ParameterSDI-C2SDI-C4
Dimension520WX512DX1020H520WX588DX1640H
Cell2sets4sets
MainPower220VACX1phase220VACX1phase
DCPower300VDCX2A300VDCX5A
Capacity3

2-10m/day(upto

2000ppmNaCl)

3

2-10m/day(upto

3000ppmNaCl

AllowablePressure6bar,max.6bar,max.
Pre-Filtering5um,10”X1EA5um,20”X1EA
Recovery80~95%80~95%
SaltRejection80~95%80~95%
ControlBoxTouchScreen,Flow

Sensor1EA,

TDSMeter2EA,Pressure

Sensor1EA

Connector15APB,one-touchtype

SMART CAPDION PRODUCTION LINE

Eaquasys, Capdion Production Line
CAPDION 3 ON PARALELL 2017-12-03 at 23.04.44

SMART CAPDION SDI-C2, SDI-C4

SMART CAPDION SDI-C2

SMART CAPDION SDI-C4

SMART CAPDION SDI-C8

RO concentrated water reuse system

  • Reduce TDS of concentration water from RO process

and reuse as RO feed

  • RO recovery rate can be dramatically increased.

Pure/ultrapure water system

  • Replace No. 2 pass RO with SDI®

To meed EDI inflow water quality

Industrial water/effluent water reuse system

  • In order to reuse the effluent from the RO process,
  • If the conductivity is high for feed water into the RO, use it on

the front of RO

  • Applicable to low salinity/high salinity effluent water
  • Reduction of RO process load when RO process is selected as

the downstream process.

Screen Shot 2018-06-08 at 05.23.05
Screen Shot 2018-06-08 at 05.29.02
Screen Shot 2018-06-08 at 05.30.55
Water Recovery
Removal of TDS
Removal of Inorganic contaminants

To acquire additional knowledge contact to our product sales division.

Municipal Water

Read More

Well Water

Read More

Wastewater Treatment

Read More
Water Treatment
Read More
Wastewater Recycling
Read More
Water Disinfection
Read More
Screen Shot 2018-06-10 at 23.24.14
Water Purification
Read More

We stay up for doing good points with you in an effort to protect your merchandise not solely from microorganisms nevertheless from hazardous chemical substances and water hardness elements..

Welcome to be our partner worldwide